Pipe Bowl

Cookie holder from PVC pipe @ onelmon

Minggu ini, saya kembali menantang diri dengan craft dari pipa PVC. Selain karena harganya yang tergolong cukup murah (yang mana membuat saya sedikit bebas dari rasa bersalah bila craft tersebut akhirnya gagal), pipa PVC juga mudah didapatkan di mana-mana. Kali ini, saya membuat eksperimen kecil dengan bentuk.

This week, I challenged myself again with a PVC pipe project. I’m just so curious to see what I can come up with from a PVC pipe (partly, because it’s inexpensive, which makes me feel less guilty if I were to destroy it [a.k.a. craft fail] and you can get it almost anywhere). This time, I made a little experiment on shapes.

Cookie holder from PVC pipe @ onelmon

Jika anda membaca postingan sebelumnya, doggie memo stand, maka anda mungkin ingat bahwa saya hanya menggunakan satu bagian dari pipa PVC berukuran panjang 15 cm itu. Dan minggu ini, saya menggunakan bagian yang satunya lagi.

If you read my post before this, the doggie memo stand, you might remember that I had only used half side of the 15 cm PVC pipe in the project. And yeap, I’m now using the other half.

Yang kita butuhkan:

  1. Pipa PVC (semakin besar diameter pipa, semaking besar mangkuknya);
  2. Cat;
  3. Lem;
  4. Gergaji tangan;
  5. Biskuit (bila anda ingin).

What we need:

  1. PVC pipe (the bigger the diameter, the larger the bowl will be);
  2. Paint;
  3. Glue;
  4. Handsaw;
  5. Cookie! (if you want some).

Cookie holder from PVC pipe @ onelmon

Potong pipa PVC menjadi strip. Saya membuat lebar strip sebesar 1 cm.

Cut the PVC pipe into stripes. I had the width 1 cm wide each.

Cookie holder from PVC pipe @ onelmon

Bersihkan sudut-sudut yang tajam dan warnai. Tunggu sampai cat benar-benar kering.

Clean the sharp edges and paint them. Wait for them to dry completely.

Cookie holder from PVC pipe @ onelmon

Susunlah menurut bentuk yang anda inginkan dan rekatkan menjadi satu. Saya menggunakan lem tembak, tapi saya rasa ada cara yang lebih baik daripada ini (saya belum sempat mencoba, tapi mungkin lem E6000 lebih kuat sebagai perekat).

Arrange the shapes to your liking and glue them together. I used glue gun, but I don’t think it’s the best way to secure the pipe together (I’ve not tried yet, but E6000 glue might work better for this).

Cookie holder from PVC pipe @ onelmon

Cookie holder from PVC pipe @ onelmon

Ambil beberapa biskuit dan taruhlan di atas mangkuk. Selamat menikmati!

Get a few pieces of cookie and let them sit on the bowl. Enjoy!

Terima kasih telah membaca! Semoga anda menyukainya! :D

Thank you for reading! Hope you like it! :D

onel

MightyCrafty.me

10 thoughts on “Pipe Bowl

    • Hello doa’a, for painting the PVC pipe, I’m sure you’ll need a plastic paint to get a nice looking result. I didn’t have one on hand, so I tried using poster, oil and acrylic paints and acrylic paint seemed to be the best out of 3 so far.

      Thank you for stopping by. Hope this helps. :)

  1. This is so cute!! They would be great to put treats in as party favors! I love the black and white design! Thanks for sharing!!

    <3
    C

    • I’m sure with a little bit more of creativity, there are a lot of other unique shapes that can be formed with these pipe stripes! Glad you like it, Christina! :D

Leave a Reply to Hannah Cancel reply

Your email address will not be published. Required fields are marked *

CommentLuv badge