Drinking Straw Frame

DIY Tutorial: Drinking Straw Frame | @onelmon

Hi everyone! Still in the drinking straw challenge series, today I’m sharing this quick tutorial on how to make a frame from just drinking straws! It’s a very lightweight frame (obviously!) and you can customize the color of the frame with your one favorite color or color combos. Go get your straws now and let’s get started!

Halo semuanya! Masih di seri tantangan pipet minum, hari ini saya berbagi tutorial cara membuat bingkai foto dengan hanya menggunakan pipet minum! Bingkai ini sangat ringan tentunya dan anda bisa menyesuaikan warna bingkai dengan satu warna favorit anda atau kombinasi warna. Ayo segera ambil pipet anda untuk membuat bingkai foto instan ini!

Drinking straw series:
– Drinking straw necklace
Drinking straw bracelet
– Drinking straw place card holder

Other drinking straw crafts:
– Adjustable straw bracelet
– Straw flowers

DIY Tutorial: Drinking Straw Frame | @onelmon

What you need | Yang anda butuhkan:

  1. Bendy drinking straws | Pipet minum bengkok;
  2. Photo | Foto;
  3. Glue | Lem;
  4. Scissors | Gunting.

DIY Tutorial: Drinking Straw Frame | @onelmon

Note | Catatan:
If you are using only one color, you just need 4 pieces of straw, but if you are doing a colorful version, you’ll need 5-8 pieces of straw.
Jika anda ingin membuat bingkai dengan satu warna, anda hanya membutuhkan 4 pipet minum, tetapi bila anda ingin bingkai yang lebih berwarna, anda akan membutuhkan 5-8 pipet minum.

Step 1:
Cut 2 x 11 cm long straw, 2 x 7 cm long straw and 4 x 3 cm long straw (with the bendy right in the center).

Langkah 1:
Potong pipet minum anda dengan panjang dan jumlah sebagai berikut: 2 x 11 cm, 2 x 7 cm dan 4 x 3 cm (dengan bengkokan tepat di tengah).

DIY Tutorial: Drinking Straw Frame | @onelmon

Step 2:
Join the cut straws with strong glue in this sequence: bendy – short straw – bendy – long straw – bendy – short straw – bendy – long straw to make a long straw. Wait for it to dry completely.

Langkah 2:
Sambungkan potongan pipet dengan lem yang kuat dengan urutan sebagai berikut: bengkokan – pipet pendek – bengkokan – pipet panjang – bengkokan – pipet pendek – bengkokan – pipet panjang untuk membuat pipet minum yang super panjang. Tunggu sampai benar-benar kering.

DIY Tutorial: Drinking Straw Frame | @onelmon

Step 3:
With your scissors, cut a long straight line on the straw, length wise.

Langkah 3:
Beri guntingan lurus panjang pada sambungan pipet minum anda.

DIY Tutorial: Drinking Straw Frame | @onelmon

Step 4:
Insert you photo into the cut line you’ve made just now so a small part of your photo is inside the straw. Dab some glue on the edges of the photo if you need to.

Langkah 4:
Masukkan foto anda ke dalam potongan garis sehingga sebagian kecil foto anda masuk ke dalam pipet. Beri sedikit lem pada sisi foto jika diperlukan.

DIY Tutorial: Drinking Straw Frame | @onelmon

Finally, join the last long straw back to the first bendy, give it some glue and wait for it to dry. Now you have a quick colorful frame!

Terakhir, sambungkan pipet panjang terakhir kembali ke bengkokan pertama, beri sedikit lem dan tunggu sampai kering. Bingkai instan anda siap menghias meja anda!

Thank you for reading! For more craft tutorials, you can visit the blog’s facebook page, twitter, pinterest, google plus and bloglovin via the clickable buttons below or subscribe through rss reader and email. Have a question? Just drop me an email or leave a comment below! See you next week for the final craft of the series!

facebook - onelmon: Crafting Experiments Twitter - onelmon pinterest - onelmon googleplus - onelmon page bloglovin rss - onelmon
onel

4 thoughts on “Drinking Straw Frame

Leave a Reply to onel Cancel reply

Your email address will not be published. Required fields are marked *

CommentLuv badge